Power Distribution
Circuit Breakers with thermal-magnetic protection
- With fixed thermal and magnetic, with adjustable thermal and fixed magnetic, with adjustable thermal and magnetic in various nominal powers and breaking capacity.
- DIN rail, fixed and withdrawable with thermal adjustment from 0,1 to 4000A.
- Circuit breakers components (coils, auxiliary contacts, motors, controls, latches, display ammeters, terminals, busbars for any type of support, etc.).
We have in stock circuit breakers of EATON (Moeller) and Schneider Electric.
Load Switches and Switch Disconnectors
- DIN rail compact
- DIN rail knife load switches
- Type NOCKEN (on panel’s door)
- Type DIN rail for cylindrical, common, NH fuses
- Type compact for NH fuses
We have in stock fuse disconnectors of EATON (Bussmann), Schneider Electric etc.
Variety of fuses of EATON Bussmann.
- Cylindrical
- Silized
- Diazed
- Neozed
- NH
- Medium voltage
- Mount bases for fuses
In addition to the compensation banks (power factor cosφ correction) that we manufacture according to your needs, we trade and install prefabricated compensation banks of reliable brands in the market, like ORTEA, Schneider Electric, ABB etc.
One way to reduce electricity cost is to compensate the reactive power. The reactive power (watt less) is essentially the energy that relapses between a source (PPC), electrical installation, and various devices.
The main way to reduce reactive power is to place capacitors in parallel with inductive loads, so that the power factor approaches the unit cosφ= 1 (actual power = apparent power).
Advantages of improving reactive power with compensation bank systems:
- Reduction of bill charges of PPC.
- Discharge of network components (cables, transformers, switches, etc.) from the reactive power component.
- Increase the life of the devices due to their smoother operation.
- Avoid coordination problems and reduce electrical disturbance.
- Reduction of power losses in cables.
- Increase productivity.
- Long lifetime.
- Molded case circuit breakers (MCCBs)
- Load Switches
- Residual current devices (RCDs)
- Relays for lighting
- Impulse relays
- Pilot lamps
- DIN rail push buttons
- DIN rail sockets
- etc.
DIN rail mounted terminals for various cable diameters and in various colours of Phoenix Contact.
Surge arresters for protection of over-voltage transients caused by external (lightning) or internal (switching) events.
- DIN rail mounted for gradual protection of distribution boards
- For weak currents
- For networks
- Lightning collector systems (Faraday cage)
- Lightning rods (certified)
Design, supply, installation and startup of UPS systems for a variety of applications. We have EATON, APC, LEVER etc.
Uninterruptible Power Supply (UPS), AC/AC, DC/DC, AC/DC.
The UPS provides electric power in the event of a power outage or instantaneous voltage drop and is used in devices or installations that we want to protect against data loss, disaster or other damage.
Depending on the requirements, a proper UPS in power and characteristics must be selected, among which:
- The type of application (e.g. home use, industrial use, PC, Data Centers, etc.).
- The number, type and criticality of the installation loads.
- The autonomy of the system required in the event of a power failure.
- The required system performance and the wider requirements.
Design, supply, installation and startup of UPS systems for a variety of applications. We have ORTEA etc.
The automatic voltage regulators are designed to provide a constant supply voltage to any electrical or electronic device, protecting it. Excessive voltage variations without the protection of the device or machine may reduce their life cycle or even destroy them. Automatic voltage regulators offer a constant supply voltage to the loads connected to them in cases where the supply voltage has disturbances (variations). It is the ideal solution in cases where protection is required from variations in the supply voltage of the electric network, without the need for uninterruptible power supply.
An inverter is an electronic device that converts continuous current (DC) to alternating current (AC).
It may be autonomous or part of another device. As an autonomous device it is used in photovoltaic system installations (autonomous or utility-interconnected) and mostly in photovoltaic parks where we need to convert a continuous current of photovoltaic panels into alternating with suitable characteristics for its input to the power network.
The categories in which we can separate inverters are:
- Type of connection to the network (single-phase or three-phase).
- Inverters with or without transformer.
- Inverters with one or multiple MPP trackers.
- Hybrid systems.
We have MEAN WELL, PHOENIX, SUNGROW and ABB (FIMER).
Plastic distribution boards, flush-mounted and surface-mounted, enclosures and cabinets of all sizes and types for power distribution.
We undertake the study, design, installation and commissioning of any type of distribution board.
We have in stock EATON, Schneider Electric etc.
Capacitors in various voltages and capacities.
We have COMAR, ORTEA (ICAR) etc.
The capacitor, or capacitance element, is an element of the circuit, which contributes to the storage of electric power with the help of the electric charge which accumulates on its conductive surfaces. The constant quotient of a capacitor’s charge to its voltage is called the capacitor’s capacitance and is denoted by the English letter C, which is the initial letter of the word Capacity.
Power supplies stabilized AC-DC, with adjustable and constant output voltages.
In various output voltages (e.g. 24VDC, 12VDC etc.), input (380VAC, 230VAC, 110VAC etc.) as well as power.
We have in stock EATON, MEAN WELL, Schneider Electric etc.
Single-phase and three-phase transformers of different voltages and power.
We have EMMIS and other.
Large variety of industrial plugs and sockets (connectors, adapters) for building and industrial applications.
We have PCE, SCAME and Schneider Electric.
- Multipole plugs male and female
- Plug covers
- Bases
- Other accessories
We have molex (GWconnect).